summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Adafruit_Python_MCP3008/.github/ISSUE_TEMPLATE.md47
-rw-r--r--Adafruit_Python_MCP3008/.github/PULL_REQUEST_TEMPLATE.md26
-rw-r--r--Adafruit_Python_MCP3008/.gitignore63
-rw-r--r--Adafruit_Python_MCP3008/Adafruit_MCP3008/MCP3008.py92
-rw-r--r--Adafruit_Python_MCP3008/Adafruit_MCP3008/__init__.py1
-rw-r--r--Adafruit_Python_MCP3008/LICENSE21
-rw-r--r--Adafruit_Python_MCP3008/README.md19
-rw-r--r--Adafruit_Python_MCP3008/examples/differential.py38
-rw-r--r--Adafruit_Python_MCP3008/examples/simpletest.py39
-rw-r--r--Adafruit_Python_MCP3008/ez_setup.py332
-rw-r--r--Adafruit_Python_MCP3008/setup.py30
11 files changed, 708 insertions, 0 deletions
diff --git a/Adafruit_Python_MCP3008/.github/ISSUE_TEMPLATE.md b/Adafruit_Python_MCP3008/.github/ISSUE_TEMPLATE.md
new file mode 100644
index 0000000..6344b2f
--- /dev/null
+++ b/Adafruit_Python_MCP3008/.github/ISSUE_TEMPLATE.md
@@ -0,0 +1,47 @@
+Thank you for opening an issue on an Adafruit Python library repository. To
+improve the speed of resolution please review the following guidelines and
+common troubleshooting steps below before creating the issue:
+
+- **Do not use GitHub issues for troubleshooting projects and issues.** Instead use
+ the forums at http://forums.adafruit.com to ask questions and troubleshoot why
+ something isn't working as expected. In many cases the problem is a common issue
+ that you will more quickly receive help from the forum community. GitHub issues
+ are meant for known defects in the code. If you don't know if there is a defect
+ in the code then start with troubleshooting on the forum first.
+
+- **If following a tutorial or guide be sure you didn't miss a step.** Carefully
+ check all of the steps and commands to run have been followed. Consult the
+ forum if you're unsure or have questions about steps in a guide/tutorial.
+
+- **For Python/Raspberry Pi projects check these very common issues to ensure they don't apply**:
+
+ - If you are receiving an **ImportError: No module named...** error then a
+ library the code depends on is not installed. Check the tutorial/guide or
+ README to ensure you have installed the necessary libraries. Usually the
+ missing library can be installed with the `pip` tool, but check the tutorial/guide
+ for the exact command.
+
+ - **Be sure you are supplying adequate power to the board.** Check the specs of
+ your board and power in an external power supply. In many cases just
+ plugging a board into your computer is not enough to power it and other
+ peripherals.
+
+ - **Double check all soldering joints and connections.** Flakey connections
+ cause many mysterious problems. See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints.
+
+If you're sure this issue is a defect in the code and checked the steps above
+please fill in the following fields to provide enough troubleshooting information.
+You may delete the guideline and text above to just leave the following details:
+
+- Platform/operating system (i.e. Raspberry Pi with Raspbian operating system,
+ Windows 32-bit, Windows 64-bit, Mac OSX 64-bit, etc.): **INSERT PLATFORM/OPERATING
+ SYSTEM HERE**
+
+- Python version (run `python -version` or `python3 -version`): **INSERT PYTHON
+ VERSION HERE**
+
+- Error message you are receiving, including any Python exception traces: **INSERT
+ ERROR MESAGE/EXCEPTION TRACES HERE***
+
+- List the steps to reproduce the problem below (if possible attach code or commands
+ to run): **LIST REPRO STEPS BELOW**
diff --git a/Adafruit_Python_MCP3008/.github/PULL_REQUEST_TEMPLATE.md b/Adafruit_Python_MCP3008/.github/PULL_REQUEST_TEMPLATE.md
new file mode 100644
index 0000000..7b641eb
--- /dev/null
+++ b/Adafruit_Python_MCP3008/.github/PULL_REQUEST_TEMPLATE.md
@@ -0,0 +1,26 @@
+Thank you for creating a pull request to contribute to Adafruit's GitHub code!
+Before you open the request please review the following guidelines and tips to
+help it be more easily integrated:
+
+- **Describe the scope of your change--i.e. what the change does and what parts
+ of the code were modified.** This will help us understand any risks of integrating
+ the code.
+
+- **Describe any known limitations with your change.** For example if the change
+ doesn't apply to a supported platform of the library please mention it.
+
+- **Please run any tests or examples that can exercise your modified code.** We
+ strive to not break users of the code and running tests/examples helps with this
+ process.
+
+Thank you again for contributing! We will try to test and integrate the change
+as soon as we can, but be aware we have many GitHub repositories to manage and
+can't immediately respond to every request. There is no need to bump or check in
+on a pull request (it will clutter the discussion of the request).
+
+Also don't be worried if the request is closed or not integrated--sometimes the
+priorities of Adafruit's GitHub code (education, ease of use) might not match the
+priorities of the pull request. Don't fret, the open source community thrives on
+forks and GitHub makes it easy to keep your changes in a forked repo.
+
+After reviewing the guidelines above you can delete this text from the pull request.
diff --git a/Adafruit_Python_MCP3008/.gitignore b/Adafruit_Python_MCP3008/.gitignore
new file mode 100644
index 0000000..e2160db
--- /dev/null
+++ b/Adafruit_Python_MCP3008/.gitignore
@@ -0,0 +1,63 @@
+setuptools-*
+# Byte-compiled / optimized / DLL files
+__pycache__/
+*.py[cod]
+*$py.class
+
+# C extensions
+*.so
+
+# Distribution / packaging
+.Python
+env/
+build/
+develop-eggs/
+dist/
+downloads/
+eggs/
+.eggs/
+lib/
+lib64/
+parts/
+sdist/
+var/
+*.egg-info/
+.installed.cfg
+*.egg
+
+# PyInstaller
+# Usually these files are written by a python script from a template
+# before PyInstaller builds the exe, so as to inject date/other infos into it.
+*.manifest
+*.spec
+
+# Installer logs
+pip-log.txt
+pip-delete-this-directory.txt
+
+# Unit test / coverage reports
+htmlcov/
+.tox/
+.coverage
+.coverage.*
+.cache
+nosetests.xml
+coverage.xml
+*,cover
+.hypothesis/
+
+# Translations
+*.mo
+*.pot
+
+# Django stuff:
+*.log
+
+# Sphinx documentation
+docs/_build/
+
+# PyBuilder
+target/
+
+#Ipython Notebook
+.ipynb_checkpoints
diff --git a/Adafruit_Python_MCP3008/Adafruit_MCP3008/MCP3008.py b/Adafruit_Python_MCP3008/Adafruit_MCP3008/MCP3008.py
new file mode 100644
index 0000000..027cec7
--- /dev/null
+++ b/Adafruit_Python_MCP3008/Adafruit_MCP3008/MCP3008.py
@@ -0,0 +1,92 @@
+# Copyright (c) 2016 Adafruit Industries
+# Author: Tony DiCola
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+import Adafruit_GPIO as GPIO
+import Adafruit_GPIO.SPI as SPI
+
+
+class MCP3008(object):
+ """Class to represent an Adafruit MCP3008 analog to digital converter.
+ """
+
+ def __init__(self, clk=None, cs=None, miso=None, mosi=None, spi=None, gpio=None):
+ """Initialize MAX31855 device with software SPI on the specified CLK,
+ CS, and DO pins. Alternatively can specify hardware SPI by sending an
+ Adafruit_GPIO.SPI.SpiDev device in the spi parameter.
+ """
+ self._spi = None
+ # Handle hardware SPI
+ if spi is not None:
+ self._spi = spi
+ elif clk is not None and cs is not None and miso is not None and mosi is not None:
+ # Default to platform GPIO if not provided.
+ if gpio is None:
+ gpio = GPIO.get_platform_gpio()
+ self._spi = SPI.BitBang(gpio, clk, mosi, miso, cs)
+ else:
+ raise ValueError('Must specify either spi for for hardware SPI or clk, cs, miso, and mosi for softwrare SPI!')
+ self._spi.set_clock_hz(1000000)
+ self._spi.set_mode(0)
+ self._spi.set_bit_order(SPI.MSBFIRST)
+
+ def read_adc(self, adc_number):
+ """Read the current value of the specified ADC channel (0-7). The values
+ can range from 0 to 1023 (10-bits).
+ """
+ assert 0 <= adc_number <= 7, 'ADC number must be a value of 0-7!'
+ # Build a single channel read command.
+ # For example channel zero = 0b11000000
+ command = 0b11 << 6 # Start bit, single channel read
+ command |= (adc_number & 0x07) << 3 # Channel number (in 3 bits)
+ # Note the bottom 3 bits of command are 0, this is to account for the
+ # extra clock to do the conversion, and the low null bit returned at
+ # the start of the response.
+ resp = self._spi.transfer([command, 0x0, 0x0])
+ # Parse out the 10 bits of response data and return it.
+ result = (resp[0] & 0x01) << 9
+ result |= (resp[1] & 0xFF) << 1
+ result |= (resp[2] & 0x80) >> 7
+ return result & 0x3FF
+
+ def read_adc_difference(self, differential):
+ """Read the difference between two channels. Differential should be a
+ value of:
+ - 0: Return channel 0 minus channel 1
+ - 1: Return channel 1 minus channel 0
+ - 2: Return channel 2 minus channel 3
+ - 3: Return channel 3 minus channel 2
+ - 4: Return channel 4 minus channel 5
+ - 5: Return channel 5 minus channel 4
+ - 6: Return channel 6 minus channel 7
+ - 7: Return channel 7 minus channel 6
+ """
+ assert 0 <= differential <= 7, 'Differential number must be a value of 0-7!'
+ # Build a difference channel read command.
+ command = 0b10 << 6 # Start bit, differential read
+ command |= (differential & 0x07) << 3 # Channel number (in 3 bits)
+ # Note the bottom 3 bits of command are 0, this is to account for the
+ # extra clock to do the conversion, and the low null bit returned at
+ # the start of the response.
+ resp = self._spi.transfer([command, 0x0, 0x0])
+ # Parse out the 10 bits of response data and return it.
+ result = (resp[0] & 0x01) << 9
+ result |= (resp[1] & 0xFF) << 1
+ result |= (resp[2] & 0x80) >> 7
+ return result & 0x3FF
diff --git a/Adafruit_Python_MCP3008/Adafruit_MCP3008/__init__.py b/Adafruit_Python_MCP3008/Adafruit_MCP3008/__init__.py
new file mode 100644
index 0000000..767086c
--- /dev/null
+++ b/Adafruit_Python_MCP3008/Adafruit_MCP3008/__init__.py
@@ -0,0 +1 @@
+from .MCP3008 import MCP3008
diff --git a/Adafruit_Python_MCP3008/LICENSE b/Adafruit_Python_MCP3008/LICENSE
new file mode 100644
index 0000000..d025531
--- /dev/null
+++ b/Adafruit_Python_MCP3008/LICENSE
@@ -0,0 +1,21 @@
+The MIT License (MIT)
+
+Copyright (c) 2016 Adafruit Industries
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
diff --git a/Adafruit_Python_MCP3008/README.md b/Adafruit_Python_MCP3008/README.md
new file mode 100644
index 0000000..6b7da9a
--- /dev/null
+++ b/Adafruit_Python_MCP3008/README.md
@@ -0,0 +1,19 @@
+# Adafruit Python MCP3008
+
+Python code to use the MCP3008 analog to digital converter with a Raspberry Pi or BeagleBone black.
+
+## Installation
+
+To install the library from source (recommended) run the following commands on a Raspberry Pi or other Debian-based OS system:
+
+ sudo apt-get install git build-essential python-dev
+ cd ~
+ git clone https://github.com/adafruit/Adafruit_Python_MCP3008.git
+ cd Adafruit_Python_MCP3008
+ sudo python setup.py install
+
+Alternatively you can install from pip with:
+
+ sudo pip install adafruit-mcp3008
+
+Note that the pip install method **won't** install the example code.
diff --git a/Adafruit_Python_MCP3008/examples/differential.py b/Adafruit_Python_MCP3008/examples/differential.py
new file mode 100644
index 0000000..df30e65
--- /dev/null
+++ b/Adafruit_Python_MCP3008/examples/differential.py
@@ -0,0 +1,38 @@
+# Simple example of reading the MCP3008 analog input channels using its
+# differential mode. Will print the difference of channel 0 and 1.
+# Author: Tony DiCola
+# License: Public Domain
+import time
+
+# Import SPI library (for hardware SPI) and MCP3008 library.
+import Adafruit_GPIO.SPI as SPI
+import Adafruit_MCP3008
+
+
+# Software SPI configuration:
+# CLK = 18
+# MISO = 23
+# MOSI = 24
+# CS = 25
+# mcp = Adafruit_MCP3008.MCP3008(clk=CLK, cs=CS, miso=MISO, mosi=MOSI)
+
+# Hardware SPI configuration:
+SPI_PORT = 0
+SPI_DEVICE = 0
+mcp = Adafruit_MCP3008.MCP3008(spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE))
+
+print('Press Ctrl-C to quit...')
+while True:
+ # Grab the difference between channel 0 and 1 (i.e. channel 0 minus 1).
+ # Note you can specify any value in 0-7 to grab other differences:
+ # - 0: Return channel 0 minus channel 1
+ # - 1: Return channel 1 minus channel 0
+ # - 2: Return channel 2 minus channel 3
+ # - 3: Return channel 3 minus channel 2
+ # - 4: Return channel 4 minus channel 5
+ # - 5: Return channel 5 minus channel 4
+ # - 6: Return channel 6 minus channel 7
+ # - 7: Return channel 7 minus channel 6
+ value = mcp.read_adc_difference(0)
+ print('Channel 0 minus 1: {0}'.format(value))
+ time.sleep(0.5)
diff --git a/Adafruit_Python_MCP3008/examples/simpletest.py b/Adafruit_Python_MCP3008/examples/simpletest.py
new file mode 100644
index 0000000..23f9f0c
--- /dev/null
+++ b/Adafruit_Python_MCP3008/examples/simpletest.py
@@ -0,0 +1,39 @@
+# Simple example of reading the MCP3008 analog input channels and printing
+# them all out.
+# Author: Tony DiCola
+# License: Public Domain
+import time
+
+# Import SPI library (for hardware SPI) and MCP3008 library.
+import Adafruit_GPIO.SPI as SPI
+import Adafruit_MCP3008
+
+
+# Software SPI configuration:
+CLK = 18
+MISO = 23
+MOSI = 24
+CS = 25
+mcp = Adafruit_MCP3008.MCP3008(clk=CLK, cs=CS, miso=MISO, mosi=MOSI)
+
+# Hardware SPI configuration:
+# SPI_PORT = 0
+# SPI_DEVICE = 0
+# mcp = Adafruit_MCP3008.MCP3008(spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE))
+
+
+print('Reading MCP3008 values, press Ctrl-C to quit...')
+# Print nice channel column headers.
+print('| {0:>4} | {1:>4} | {2:>4} | {3:>4} | {4:>4} | {5:>4} | {6:>4} | {7:>4} |'.format(*range(8)))
+print('-' * 57)
+# Main program loop.
+while True:
+ # Read all the ADC channel values in a list.
+ values = [0]*8
+ for i in range(8):
+ # The read_adc function will get the value of the specified channel (0-7).
+ values[i] = mcp.read_adc(i)
+ # Print the ADC values.
+ print('| {0:>4} | {1:>4} | {2:>4} | {3:>4} | {4:>4} | {5:>4} | {6:>4} | {7:>4} |'.format(*values))
+ # Pause for half a second.
+ time.sleep(0.5)
diff --git a/Adafruit_Python_MCP3008/ez_setup.py b/Adafruit_Python_MCP3008/ez_setup.py
new file mode 100644
index 0000000..23ea9a2
--- /dev/null
+++ b/Adafruit_Python_MCP3008/ez_setup.py
@@ -0,0 +1,332 @@
+#!/usr/bin/env python
+"""Bootstrap setuptools installation
+
+To use setuptools in your package's setup.py, include this
+file in the same directory and add this to the top of your setup.py::
+
+ from ez_setup import use_setuptools
+ use_setuptools()
+
+To require a specific version of setuptools, set a download
+mirror, or use an alternate download directory, simply supply
+the appropriate options to ``use_setuptools()``.
+
+This file can also be run as a script to install or upgrade setuptools.
+"""
+import os
+import shutil
+import sys
+import tempfile
+import zipfile
+import optparse
+import subprocess
+import platform
+import textwrap
+import contextlib
+
+from distutils import log
+
+try:
+ from site import USER_SITE
+except ImportError:
+ USER_SITE = None
+
+DEFAULT_VERSION = "3.5.1"
+DEFAULT_URL = "https://pypi.python.org/packages/source/s/setuptools/"
+
+def _python_cmd(*args):
+ """
+ Return True if the command succeeded.
+ """
+ args = (sys.executable,) + args
+ return subprocess.call(args) == 0
+
+
+def _install(archive_filename, install_args=()):
+ with archive_context(archive_filename):
+ # installing
+ log.warn('Installing Setuptools')
+ if not _python_cmd('setup.py', 'install', *install_args):
+ log.warn('Something went wrong during the installation.')
+ log.warn('See the error message above.')
+ # exitcode will be 2
+ return 2
+
+
+def _build_egg(egg, archive_filename, to_dir):
+ with archive_context(archive_filename):
+ # building an egg
+ log.warn('Building a Setuptools egg in %s', to_dir)
+ _python_cmd('setup.py', '-q', 'bdist_egg', '--dist-dir', to_dir)
+ # returning the result
+ log.warn(egg)
+ if not os.path.exists(egg):
+ raise IOError('Could not build the egg.')
+
+
+def get_zip_class():
+ """
+ Supplement ZipFile class to support context manager for Python 2.6
+ """
+ class ContextualZipFile(zipfile.ZipFile):
+ def __enter__(self):
+ return self
+ def __exit__(self, type, value, traceback):
+ self.close
+ return zipfile.ZipFile if hasattr(zipfile.ZipFile, '__exit__') else \
+ ContextualZipFile
+
+
+@contextlib.contextmanager
+def archive_context(filename):
+ # extracting the archive
+ tmpdir = tempfile.mkdtemp()
+ log.warn('Extracting in %s', tmpdir)
+ old_wd = os.getcwd()
+ try:
+ os.chdir(tmpdir)
+ with get_zip_class()(filename) as archive:
+ archive.extractall()
+
+ # going in the directory
+ subdir = os.path.join(tmpdir, os.listdir(tmpdir)[0])
+ os.chdir(subdir)
+ log.warn('Now working in %s', subdir)
+ yield
+
+ finally:
+ os.chdir(old_wd)
+ shutil.rmtree(tmpdir)
+
+
+def _do_download(version, download_base, to_dir, download_delay):
+ egg = os.path.join(to_dir, 'setuptools-%s-py%d.%d.egg'
+ % (version, sys.version_info[0], sys.version_info[1]))
+ if not os.path.exists(egg):
+ archive = download_setuptools(version, download_base,
+ to_dir, download_delay)
+ _build_egg(egg, archive, to_dir)
+ sys.path.insert(0, egg)
+
+ # Remove previously-imported pkg_resources if present (see
+ # https://bitbucket.org/pypa/setuptools/pull-request/7/ for details).
+ if 'pkg_resources' in sys.modules:
+ del sys.modules['pkg_resources']
+
+ import setuptools
+ setuptools.bootstrap_install_from = egg
+
+
+def use_setuptools(version=DEFAULT_VERSION, download_base=DEFAULT_URL,
+ to_dir=os.curdir, download_delay=15):
+ to_dir = os.path.abspath(to_dir)
+ rep_modules = 'pkg_resources', 'setuptools'
+ imported = set(sys.modules).intersection(rep_modules)
+ try:
+ import pkg_resources
+ except ImportError:
+ return _do_download(version, download_base, to_dir, download_delay)
+ try:
+ pkg_resources.require("setuptools>=" + version)
+ return
+ except pkg_resources.DistributionNotFound:
+ return _do_download(version, download_base, to_dir, download_delay)
+ except pkg_resources.VersionConflict as VC_err:
+ if imported:
+ msg = textwrap.dedent("""
+ The required version of setuptools (>={version}) is not available,
+ and can't be installed while this script is running. Please
+ install a more recent version first, using
+ 'easy_install -U setuptools'.
+
+ (Currently using {VC_err.args[0]!r})
+ """).format(VC_err=VC_err, version=version)
+ sys.stderr.write(msg)
+ sys.exit(2)
+
+ # otherwise, reload ok
+ del pkg_resources, sys.modules['pkg_resources']
+ return _do_download(version, download_base, to_dir, download_delay)
+
+def _clean_check(cmd, target):
+ """
+ Run the command to download target. If the command fails, clean up before
+ re-raising the error.
+ """
+ try:
+ subprocess.check_call(cmd)
+ except subprocess.CalledProcessError:
+ if os.access(target, os.F_OK):
+ os.unlink(target)
+ raise
+
+def download_file_powershell(url, target):
+ """
+ Download the file at url to target using Powershell (which will validate
+ trust). Raise an exception if the command cannot complete.
+ """
+ target = os.path.abspath(target)
+ cmd = [
+ 'powershell',
+ '-Command',
+ "(new-object System.Net.WebClient).DownloadFile(%(url)r, %(target)r)" % vars(),
+ ]
+ _clean_check(cmd, target)
+
+def has_powershell():
+ if platform.system() != 'Windows':
+ return False
+ cmd = ['powershell', '-Command', 'echo test']
+ devnull = open(os.path.devnull, 'wb')
+ try:
+ try:
+ subprocess.check_call(cmd, stdout=devnull, stderr=devnull)
+ except Exception:
+ return False
+ finally:
+ devnull.close()
+ return True
+
+download_file_powershell.viable = has_powershell
+
+def download_file_curl(url, target):
+ cmd = ['curl', url, '--silent', '--output', target]
+ _clean_check(cmd, target)
+
+def has_curl():
+ cmd = ['curl', '--version']
+ devnull = open(os.path.devnull, 'wb')
+ try:
+ try:
+ subprocess.check_call(cmd, stdout=devnull, stderr=devnull)
+ except Exception:
+ return False
+ finally:
+ devnull.close()
+ return True
+
+download_file_curl.viable = has_curl
+
+def download_file_wget(url, target):
+ cmd = ['wget', url, '--quiet', '--output-document', target]
+ _clean_check(cmd, target)
+
+def has_wget():
+ cmd = ['wget', '--version']
+ devnull = open(os.path.devnull, 'wb')
+ try:
+ try:
+ subprocess.check_call(cmd, stdout=devnull, stderr=devnull)
+ except Exception:
+ return False
+ finally:
+ devnull.close()
+ return True
+
+download_file_wget.viable = has_wget
+
+def download_file_insecure(url, target):
+ """
+ Use Python to download the file, even though it cannot authenticate the
+ connection.
+ """
+ try:
+ from urllib.request import urlopen
+ except ImportError:
+ from urllib2 import urlopen
+ src = dst = None
+ try:
+ src = urlopen(url)
+ # Read/write all in one block, so we don't create a corrupt file
+ # if the download is interrupted.
+ data = src.read()
+ dst = open(target, "wb")
+ dst.write(data)
+ finally:
+ if src:
+ src.close()
+ if dst:
+ dst.close()
+
+download_file_insecure.viable = lambda: True
+
+def get_best_downloader():
+ downloaders = [
+ download_file_powershell,
+ download_file_curl,
+ download_file_wget,
+ download_file_insecure,
+ ]
+
+ for dl in downloaders:
+ if dl.viable():
+ return dl
+
+def download_setuptools(version=DEFAULT_VERSION, download_base=DEFAULT_URL,
+ to_dir=os.curdir, delay=15, downloader_factory=get_best_downloader):
+ """
+ Download setuptools from a specified location and return its filename
+
+ `version` should be a valid setuptools version number that is available
+ as an egg for download under the `download_base` URL (which should end
+ with a '/'). `to_dir` is the directory where the egg will be downloaded.
+ `delay` is the number of seconds to pause before an actual download
+ attempt.
+
+ ``downloader_factory`` should be a function taking no arguments and
+ returning a function for downloading a URL to a target.
+ """
+ # making sure we use the absolute path
+ to_dir = os.path.abspath(to_dir)
+ zip_name = "setuptools-%s.zip" % version
+ url = download_base + zip_name
+ saveto = os.path.join(to_dir, zip_name)
+ if not os.path.exists(saveto): # Avoid repeated downloads
+ log.warn("Downloading %s", url)
+ downloader = downloader_factory()
+ downloader(url, saveto)
+ return os.path.realpath(saveto)
+
+def _build_install_args(options):
+ """
+ Build the arguments to 'python setup.py install' on the setuptools package
+ """
+ return ['--user'] if options.user_install else []
+
+def _parse_args():
+ """
+ Parse the command line for options
+ """
+ parser = optparse.OptionParser()
+ parser.add_option(
+ '--user', dest='user_install', action='store_true', default=False,
+ help='install in user site package (requires Python 2.6 or later)')
+ parser.add_option(
+ '--download-base', dest='download_base', metavar="URL",
+ default=DEFAULT_URL,
+ help='alternative URL from where to download the setuptools package')
+ parser.add_option(
+ '--insecure', dest='downloader_factory', action='store_const',
+ const=lambda: download_file_insecure, default=get_best_downloader,
+ help='Use internal, non-validating downloader'
+ )
+ parser.add_option(
+ '--version', help="Specify which version to download",
+ default=DEFAULT_VERSION,
+ )
+ options, args = parser.parse_args()
+ # positional arguments are ignored
+ return options
+
+def main():
+ """Install or upgrade setuptools and EasyInstall"""
+ options = _parse_args()
+ archive = download_setuptools(
+ version=options.version,
+ download_base=options.download_base,
+ downloader_factory=options.downloader_factory,
+ )
+ return _install(archive, _build_install_args(options))
+
+if __name__ == '__main__':
+ sys.exit(main())
diff --git a/Adafruit_Python_MCP3008/setup.py b/Adafruit_Python_MCP3008/setup.py
new file mode 100644
index 0000000..31bda9c
--- /dev/null
+++ b/Adafruit_Python_MCP3008/setup.py
@@ -0,0 +1,30 @@
+try:
+ # Try using ez_setup to install setuptools if not already installed.
+ from ez_setup import use_setuptools
+ use_setuptools()
+except ImportError:
+ # Ignore import error and assume Python 3 which already has setuptools.
+ pass
+
+from setuptools import setup, find_packages
+
+classifiers = ['Development Status :: 4 - Beta',
+ 'Operating System :: POSIX :: Linux',
+ 'License :: OSI Approved :: MIT License',
+ 'Intended Audience :: Developers',
+ 'Programming Language :: Python :: 2.7',
+ 'Programming Language :: Python :: 3',
+ 'Topic :: Software Development',
+ 'Topic :: System :: Hardware']
+
+setup(name = 'Adafruit_MCP3008',
+ version = '1.0.2',
+ author = 'Tony DiCola',
+ author_email = 'tdicola@adafruit.com',
+ description = 'Python code to use the MCP3008 analog to digital converter with a Raspberry Pi or BeagleBone black.',
+ license = 'MIT',
+ classifiers = classifiers,
+ url = 'https://github.com/adafruit/Adafruit_Python_MCP3008/',
+ dependency_links = ['https://github.com/adafruit/Adafruit_Python_GPIO/tarball/master#egg=Adafruit-GPIO-0.6.5'],
+ install_requires = ['Adafruit-GPIO>=0.6.5'],
+ packages = find_packages())