diff options
Diffstat (limited to 'Adafruit_Python_MCP3008')
| -rw-r--r-- | Adafruit_Python_MCP3008/.github/ISSUE_TEMPLATE.md | 47 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/.github/PULL_REQUEST_TEMPLATE.md | 26 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/.gitignore | 63 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/Adafruit_MCP3008/MCP3008.py | 92 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/Adafruit_MCP3008/__init__.py | 1 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/LICENSE | 21 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/README.md | 19 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/examples/differential.py | 38 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/examples/simpletest.py | 39 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/ez_setup.py | 332 | ||||
| -rw-r--r-- | Adafruit_Python_MCP3008/setup.py | 30 |
11 files changed, 0 insertions, 708 deletions
diff --git a/Adafruit_Python_MCP3008/.github/ISSUE_TEMPLATE.md b/Adafruit_Python_MCP3008/.github/ISSUE_TEMPLATE.md deleted file mode 100644 index 6344b2f..0000000 --- a/Adafruit_Python_MCP3008/.github/ISSUE_TEMPLATE.md +++ /dev/null @@ -1,47 +0,0 @@ -Thank you for opening an issue on an Adafruit Python library repository. To -improve the speed of resolution please review the following guidelines and -common troubleshooting steps below before creating the issue: - -- **Do not use GitHub issues for troubleshooting projects and issues.** Instead use - the forums at http://forums.adafruit.com to ask questions and troubleshoot why - something isn't working as expected. In many cases the problem is a common issue - that you will more quickly receive help from the forum community. GitHub issues - are meant for known defects in the code. If you don't know if there is a defect - in the code then start with troubleshooting on the forum first. - -- **If following a tutorial or guide be sure you didn't miss a step.** Carefully - check all of the steps and commands to run have been followed. Consult the - forum if you're unsure or have questions about steps in a guide/tutorial. - -- **For Python/Raspberry Pi projects check these very common issues to ensure they don't apply**: - - - If you are receiving an **ImportError: No module named...** error then a - library the code depends on is not installed. Check the tutorial/guide or - README to ensure you have installed the necessary libraries. Usually the - missing library can be installed with the `pip` tool, but check the tutorial/guide - for the exact command. - - - **Be sure you are supplying adequate power to the board.** Check the specs of - your board and power in an external power supply. In many cases just - plugging a board into your computer is not enough to power it and other - peripherals. - - - **Double check all soldering joints and connections.** Flakey connections - cause many mysterious problems. See the [guide to excellent soldering](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) for examples of good solder joints. - -If you're sure this issue is a defect in the code and checked the steps above -please fill in the following fields to provide enough troubleshooting information. -You may delete the guideline and text above to just leave the following details: - -- Platform/operating system (i.e. Raspberry Pi with Raspbian operating system, - Windows 32-bit, Windows 64-bit, Mac OSX 64-bit, etc.): **INSERT PLATFORM/OPERATING - SYSTEM HERE** - -- Python version (run `python -version` or `python3 -version`): **INSERT PYTHON - VERSION HERE** - -- Error message you are receiving, including any Python exception traces: **INSERT - ERROR MESAGE/EXCEPTION TRACES HERE*** - -- List the steps to reproduce the problem below (if possible attach code or commands - to run): **LIST REPRO STEPS BELOW** diff --git a/Adafruit_Python_MCP3008/.github/PULL_REQUEST_TEMPLATE.md b/Adafruit_Python_MCP3008/.github/PULL_REQUEST_TEMPLATE.md deleted file mode 100644 index 7b641eb..0000000 --- a/Adafruit_Python_MCP3008/.github/PULL_REQUEST_TEMPLATE.md +++ /dev/null @@ -1,26 +0,0 @@ -Thank you for creating a pull request to contribute to Adafruit's GitHub code! -Before you open the request please review the following guidelines and tips to -help it be more easily integrated: - -- **Describe the scope of your change--i.e. what the change does and what parts - of the code were modified.** This will help us understand any risks of integrating - the code. - -- **Describe any known limitations with your change.** For example if the change - doesn't apply to a supported platform of the library please mention it. - -- **Please run any tests or examples that can exercise your modified code.** We - strive to not break users of the code and running tests/examples helps with this - process. - -Thank you again for contributing! We will try to test and integrate the change -as soon as we can, but be aware we have many GitHub repositories to manage and -can't immediately respond to every request. There is no need to bump or check in -on a pull request (it will clutter the discussion of the request). - -Also don't be worried if the request is closed or not integrated--sometimes the -priorities of Adafruit's GitHub code (education, ease of use) might not match the -priorities of the pull request. Don't fret, the open source community thrives on -forks and GitHub makes it easy to keep your changes in a forked repo. - -After reviewing the guidelines above you can delete this text from the pull request. diff --git a/Adafruit_Python_MCP3008/.gitignore b/Adafruit_Python_MCP3008/.gitignore deleted file mode 100644 index e2160db..0000000 --- a/Adafruit_Python_MCP3008/.gitignore +++ /dev/null @@ -1,63 +0,0 @@ -setuptools-* -# Byte-compiled / optimized / DLL files -__pycache__/ -*.py[cod] -*$py.class - -# C extensions -*.so - -# Distribution / packaging -.Python -env/ -build/ -develop-eggs/ -dist/ -downloads/ -eggs/ -.eggs/ -lib/ -lib64/ -parts/ -sdist/ -var/ -*.egg-info/ -.installed.cfg -*.egg - -# PyInstaller -# Usually these files are written by a python script from a template -# before PyInstaller builds the exe, so as to inject date/other infos into it. -*.manifest -*.spec - -# Installer logs -pip-log.txt -pip-delete-this-directory.txt - -# Unit test / coverage reports -htmlcov/ -.tox/ -.coverage -.coverage.* -.cache -nosetests.xml -coverage.xml -*,cover -.hypothesis/ - -# Translations -*.mo -*.pot - -# Django stuff: -*.log - -# Sphinx documentation -docs/_build/ - -# PyBuilder -target/ - -#Ipython Notebook -.ipynb_checkpoints diff --git a/Adafruit_Python_MCP3008/Adafruit_MCP3008/MCP3008.py b/Adafruit_Python_MCP3008/Adafruit_MCP3008/MCP3008.py deleted file mode 100644 index 027cec7..0000000 --- a/Adafruit_Python_MCP3008/Adafruit_MCP3008/MCP3008.py +++ /dev/null @@ -1,92 +0,0 @@ -# Copyright (c) 2016 Adafruit Industries -# Author: Tony DiCola -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to deal -# in the Software without restriction, including without limitation the rights -# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -# copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -# THE SOFTWARE. -import Adafruit_GPIO as GPIO -import Adafruit_GPIO.SPI as SPI - - -class MCP3008(object): - """Class to represent an Adafruit MCP3008 analog to digital converter. - """ - - def __init__(self, clk=None, cs=None, miso=None, mosi=None, spi=None, gpio=None): - """Initialize MAX31855 device with software SPI on the specified CLK, - CS, and DO pins. Alternatively can specify hardware SPI by sending an - Adafruit_GPIO.SPI.SpiDev device in the spi parameter. - """ - self._spi = None - # Handle hardware SPI - if spi is not None: - self._spi = spi - elif clk is not None and cs is not None and miso is not None and mosi is not None: - # Default to platform GPIO if not provided. - if gpio is None: - gpio = GPIO.get_platform_gpio() - self._spi = SPI.BitBang(gpio, clk, mosi, miso, cs) - else: - raise ValueError('Must specify either spi for for hardware SPI or clk, cs, miso, and mosi for softwrare SPI!') - self._spi.set_clock_hz(1000000) - self._spi.set_mode(0) - self._spi.set_bit_order(SPI.MSBFIRST) - - def read_adc(self, adc_number): - """Read the current value of the specified ADC channel (0-7). The values - can range from 0 to 1023 (10-bits). - """ - assert 0 <= adc_number <= 7, 'ADC number must be a value of 0-7!' - # Build a single channel read command. - # For example channel zero = 0b11000000 - command = 0b11 << 6 # Start bit, single channel read - command |= (adc_number & 0x07) << 3 # Channel number (in 3 bits) - # Note the bottom 3 bits of command are 0, this is to account for the - # extra clock to do the conversion, and the low null bit returned at - # the start of the response. - resp = self._spi.transfer([command, 0x0, 0x0]) - # Parse out the 10 bits of response data and return it. - result = (resp[0] & 0x01) << 9 - result |= (resp[1] & 0xFF) << 1 - result |= (resp[2] & 0x80) >> 7 - return result & 0x3FF - - def read_adc_difference(self, differential): - """Read the difference between two channels. Differential should be a - value of: - - 0: Return channel 0 minus channel 1 - - 1: Return channel 1 minus channel 0 - - 2: Return channel 2 minus channel 3 - - 3: Return channel 3 minus channel 2 - - 4: Return channel 4 minus channel 5 - - 5: Return channel 5 minus channel 4 - - 6: Return channel 6 minus channel 7 - - 7: Return channel 7 minus channel 6 - """ - assert 0 <= differential <= 7, 'Differential number must be a value of 0-7!' - # Build a difference channel read command. - command = 0b10 << 6 # Start bit, differential read - command |= (differential & 0x07) << 3 # Channel number (in 3 bits) - # Note the bottom 3 bits of command are 0, this is to account for the - # extra clock to do the conversion, and the low null bit returned at - # the start of the response. - resp = self._spi.transfer([command, 0x0, 0x0]) - # Parse out the 10 bits of response data and return it. - result = (resp[0] & 0x01) << 9 - result |= (resp[1] & 0xFF) << 1 - result |= (resp[2] & 0x80) >> 7 - return result & 0x3FF diff --git a/Adafruit_Python_MCP3008/Adafruit_MCP3008/__init__.py b/Adafruit_Python_MCP3008/Adafruit_MCP3008/__init__.py deleted file mode 100644 index 767086c..0000000 --- a/Adafruit_Python_MCP3008/Adafruit_MCP3008/__init__.py +++ /dev/null @@ -1 +0,0 @@ -from .MCP3008 import MCP3008 diff --git a/Adafruit_Python_MCP3008/LICENSE b/Adafruit_Python_MCP3008/LICENSE deleted file mode 100644 index d025531..0000000 --- a/Adafruit_Python_MCP3008/LICENSE +++ /dev/null @@ -1,21 +0,0 @@ -The MIT License (MIT) - -Copyright (c) 2016 Adafruit Industries - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. diff --git a/Adafruit_Python_MCP3008/README.md b/Adafruit_Python_MCP3008/README.md deleted file mode 100644 index 6b7da9a..0000000 --- a/Adafruit_Python_MCP3008/README.md +++ /dev/null @@ -1,19 +0,0 @@ -# Adafruit Python MCP3008 - -Python code to use the MCP3008 analog to digital converter with a Raspberry Pi or BeagleBone black. - -## Installation - -To install the library from source (recommended) run the following commands on a Raspberry Pi or other Debian-based OS system: - - sudo apt-get install git build-essential python-dev - cd ~ - git clone https://github.com/adafruit/Adafruit_Python_MCP3008.git - cd Adafruit_Python_MCP3008 - sudo python setup.py install - -Alternatively you can install from pip with: - - sudo pip install adafruit-mcp3008 - -Note that the pip install method **won't** install the example code. diff --git a/Adafruit_Python_MCP3008/examples/differential.py b/Adafruit_Python_MCP3008/examples/differential.py deleted file mode 100644 index df30e65..0000000 --- a/Adafruit_Python_MCP3008/examples/differential.py +++ /dev/null @@ -1,38 +0,0 @@ -# Simple example of reading the MCP3008 analog input channels using its -# differential mode. Will print the difference of channel 0 and 1. -# Author: Tony DiCola -# License: Public Domain -import time - -# Import SPI library (for hardware SPI) and MCP3008 library. -import Adafruit_GPIO.SPI as SPI -import Adafruit_MCP3008 - - -# Software SPI configuration: -# CLK = 18 -# MISO = 23 -# MOSI = 24 -# CS = 25 -# mcp = Adafruit_MCP3008.MCP3008(clk=CLK, cs=CS, miso=MISO, mosi=MOSI) - -# Hardware SPI configuration: -SPI_PORT = 0 -SPI_DEVICE = 0 -mcp = Adafruit_MCP3008.MCP3008(spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE)) - -print('Press Ctrl-C to quit...') -while True: - # Grab the difference between channel 0 and 1 (i.e. channel 0 minus 1). - # Note you can specify any value in 0-7 to grab other differences: - # - 0: Return channel 0 minus channel 1 - # - 1: Return channel 1 minus channel 0 - # - 2: Return channel 2 minus channel 3 - # - 3: Return channel 3 minus channel 2 - # - 4: Return channel 4 minus channel 5 - # - 5: Return channel 5 minus channel 4 - # - 6: Return channel 6 minus channel 7 - # - 7: Return channel 7 minus channel 6 - value = mcp.read_adc_difference(0) - print('Channel 0 minus 1: {0}'.format(value)) - time.sleep(0.5) diff --git a/Adafruit_Python_MCP3008/examples/simpletest.py b/Adafruit_Python_MCP3008/examples/simpletest.py deleted file mode 100644 index 23f9f0c..0000000 --- a/Adafruit_Python_MCP3008/examples/simpletest.py +++ /dev/null @@ -1,39 +0,0 @@ -# Simple example of reading the MCP3008 analog input channels and printing -# them all out. -# Author: Tony DiCola -# License: Public Domain -import time - -# Import SPI library (for hardware SPI) and MCP3008 library. -import Adafruit_GPIO.SPI as SPI -import Adafruit_MCP3008 - - -# Software SPI configuration: -CLK = 18 -MISO = 23 -MOSI = 24 -CS = 25 -mcp = Adafruit_MCP3008.MCP3008(clk=CLK, cs=CS, miso=MISO, mosi=MOSI) - -# Hardware SPI configuration: -# SPI_PORT = 0 -# SPI_DEVICE = 0 -# mcp = Adafruit_MCP3008.MCP3008(spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE)) - - -print('Reading MCP3008 values, press Ctrl-C to quit...') -# Print nice channel column headers. -print('| {0:>4} | {1:>4} | {2:>4} | {3:>4} | {4:>4} | {5:>4} | {6:>4} | {7:>4} |'.format(*range(8))) -print('-' * 57) -# Main program loop. -while True: - # Read all the ADC channel values in a list. - values = [0]*8 - for i in range(8): - # The read_adc function will get the value of the specified channel (0-7). - values[i] = mcp.read_adc(i) - # Print the ADC values. - print('| {0:>4} | {1:>4} | {2:>4} | {3:>4} | {4:>4} | {5:>4} | {6:>4} | {7:>4} |'.format(*values)) - # Pause for half a second. - time.sleep(0.5) diff --git a/Adafruit_Python_MCP3008/ez_setup.py b/Adafruit_Python_MCP3008/ez_setup.py deleted file mode 100644 index 23ea9a2..0000000 --- a/Adafruit_Python_MCP3008/ez_setup.py +++ /dev/null @@ -1,332 +0,0 @@ -#!/usr/bin/env python -"""Bootstrap setuptools installation - -To use setuptools in your package's setup.py, include this -file in the same directory and add this to the top of your setup.py:: - - from ez_setup import use_setuptools - use_setuptools() - -To require a specific version of setuptools, set a download -mirror, or use an alternate download directory, simply supply -the appropriate options to ``use_setuptools()``. - -This file can also be run as a script to install or upgrade setuptools. -""" -import os -import shutil -import sys -import tempfile -import zipfile -import optparse -import subprocess -import platform -import textwrap -import contextlib - -from distutils import log - -try: - from site import USER_SITE -except ImportError: - USER_SITE = None - -DEFAULT_VERSION = "3.5.1" -DEFAULT_URL = "https://pypi.python.org/packages/source/s/setuptools/" - -def _python_cmd(*args): - """ - Return True if the command succeeded. - """ - args = (sys.executable,) + args - return subprocess.call(args) == 0 - - -def _install(archive_filename, install_args=()): - with archive_context(archive_filename): - # installing - log.warn('Installing Setuptools') - if not _python_cmd('setup.py', 'install', *install_args): - log.warn('Something went wrong during the installation.') - log.warn('See the error message above.') - # exitcode will be 2 - return 2 - - -def _build_egg(egg, archive_filename, to_dir): - with archive_context(archive_filename): - # building an egg - log.warn('Building a Setuptools egg in %s', to_dir) - _python_cmd('setup.py', '-q', 'bdist_egg', '--dist-dir', to_dir) - # returning the result - log.warn(egg) - if not os.path.exists(egg): - raise IOError('Could not build the egg.') - - -def get_zip_class(): - """ - Supplement ZipFile class to support context manager for Python 2.6 - """ - class ContextualZipFile(zipfile.ZipFile): - def __enter__(self): - return self - def __exit__(self, type, value, traceback): - self.close - return zipfile.ZipFile if hasattr(zipfile.ZipFile, '__exit__') else \ - ContextualZipFile - - -@contextlib.contextmanager -def archive_context(filename): - # extracting the archive - tmpdir = tempfile.mkdtemp() - log.warn('Extracting in %s', tmpdir) - old_wd = os.getcwd() - try: - os.chdir(tmpdir) - with get_zip_class()(filename) as archive: - archive.extractall() - - # going in the directory - subdir = os.path.join(tmpdir, os.listdir(tmpdir)[0]) - os.chdir(subdir) - log.warn('Now working in %s', subdir) - yield - - finally: - os.chdir(old_wd) - shutil.rmtree(tmpdir) - - -def _do_download(version, download_base, to_dir, download_delay): - egg = os.path.join(to_dir, 'setuptools-%s-py%d.%d.egg' - % (version, sys.version_info[0], sys.version_info[1])) - if not os.path.exists(egg): - archive = download_setuptools(version, download_base, - to_dir, download_delay) - _build_egg(egg, archive, to_dir) - sys.path.insert(0, egg) - - # Remove previously-imported pkg_resources if present (see - # https://bitbucket.org/pypa/setuptools/pull-request/7/ for details). - if 'pkg_resources' in sys.modules: - del sys.modules['pkg_resources'] - - import setuptools - setuptools.bootstrap_install_from = egg - - -def use_setuptools(version=DEFAULT_VERSION, download_base=DEFAULT_URL, - to_dir=os.curdir, download_delay=15): - to_dir = os.path.abspath(to_dir) - rep_modules = 'pkg_resources', 'setuptools' - imported = set(sys.modules).intersection(rep_modules) - try: - import pkg_resources - except ImportError: - return _do_download(version, download_base, to_dir, download_delay) - try: - pkg_resources.require("setuptools>=" + version) - return - except pkg_resources.DistributionNotFound: - return _do_download(version, download_base, to_dir, download_delay) - except pkg_resources.VersionConflict as VC_err: - if imported: - msg = textwrap.dedent(""" - The required version of setuptools (>={version}) is not available, - and can't be installed while this script is running. Please - install a more recent version first, using - 'easy_install -U setuptools'. - - (Currently using {VC_err.args[0]!r}) - """).format(VC_err=VC_err, version=version) - sys.stderr.write(msg) - sys.exit(2) - - # otherwise, reload ok - del pkg_resources, sys.modules['pkg_resources'] - return _do_download(version, download_base, to_dir, download_delay) - -def _clean_check(cmd, target): - """ - Run the command to download target. If the command fails, clean up before - re-raising the error. - """ - try: - subprocess.check_call(cmd) - except subprocess.CalledProcessError: - if os.access(target, os.F_OK): - os.unlink(target) - raise - -def download_file_powershell(url, target): - """ - Download the file at url to target using Powershell (which will validate - trust). Raise an exception if the command cannot complete. - """ - target = os.path.abspath(target) - cmd = [ - 'powershell', - '-Command', - "(new-object System.Net.WebClient).DownloadFile(%(url)r, %(target)r)" % vars(), - ] - _clean_check(cmd, target) - -def has_powershell(): - if platform.system() != 'Windows': - return False - cmd = ['powershell', '-Command', 'echo test'] - devnull = open(os.path.devnull, 'wb') - try: - try: - subprocess.check_call(cmd, stdout=devnull, stderr=devnull) - except Exception: - return False - finally: - devnull.close() - return True - -download_file_powershell.viable = has_powershell - -def download_file_curl(url, target): - cmd = ['curl', url, '--silent', '--output', target] - _clean_check(cmd, target) - -def has_curl(): - cmd = ['curl', '--version'] - devnull = open(os.path.devnull, 'wb') - try: - try: - subprocess.check_call(cmd, stdout=devnull, stderr=devnull) - except Exception: - return False - finally: - devnull.close() - return True - -download_file_curl.viable = has_curl - -def download_file_wget(url, target): - cmd = ['wget', url, '--quiet', '--output-document', target] - _clean_check(cmd, target) - -def has_wget(): - cmd = ['wget', '--version'] - devnull = open(os.path.devnull, 'wb') - try: - try: - subprocess.check_call(cmd, stdout=devnull, stderr=devnull) - except Exception: - return False - finally: - devnull.close() - return True - -download_file_wget.viable = has_wget - -def download_file_insecure(url, target): - """ - Use Python to download the file, even though it cannot authenticate the - connection. - """ - try: - from urllib.request import urlopen - except ImportError: - from urllib2 import urlopen - src = dst = None - try: - src = urlopen(url) - # Read/write all in one block, so we don't create a corrupt file - # if the download is interrupted. - data = src.read() - dst = open(target, "wb") - dst.write(data) - finally: - if src: - src.close() - if dst: - dst.close() - -download_file_insecure.viable = lambda: True - -def get_best_downloader(): - downloaders = [ - download_file_powershell, - download_file_curl, - download_file_wget, - download_file_insecure, - ] - - for dl in downloaders: - if dl.viable(): - return dl - -def download_setuptools(version=DEFAULT_VERSION, download_base=DEFAULT_URL, - to_dir=os.curdir, delay=15, downloader_factory=get_best_downloader): - """ - Download setuptools from a specified location and return its filename - - `version` should be a valid setuptools version number that is available - as an egg for download under the `download_base` URL (which should end - with a '/'). `to_dir` is the directory where the egg will be downloaded. - `delay` is the number of seconds to pause before an actual download - attempt. - - ``downloader_factory`` should be a function taking no arguments and - returning a function for downloading a URL to a target. - """ - # making sure we use the absolute path - to_dir = os.path.abspath(to_dir) - zip_name = "setuptools-%s.zip" % version - url = download_base + zip_name - saveto = os.path.join(to_dir, zip_name) - if not os.path.exists(saveto): # Avoid repeated downloads - log.warn("Downloading %s", url) - downloader = downloader_factory() - downloader(url, saveto) - return os.path.realpath(saveto) - -def _build_install_args(options): - """ - Build the arguments to 'python setup.py install' on the setuptools package - """ - return ['--user'] if options.user_install else [] - -def _parse_args(): - """ - Parse the command line for options - """ - parser = optparse.OptionParser() - parser.add_option( - '--user', dest='user_install', action='store_true', default=False, - help='install in user site package (requires Python 2.6 or later)') - parser.add_option( - '--download-base', dest='download_base', metavar="URL", - default=DEFAULT_URL, - help='alternative URL from where to download the setuptools package') - parser.add_option( - '--insecure', dest='downloader_factory', action='store_const', - const=lambda: download_file_insecure, default=get_best_downloader, - help='Use internal, non-validating downloader' - ) - parser.add_option( - '--version', help="Specify which version to download", - default=DEFAULT_VERSION, - ) - options, args = parser.parse_args() - # positional arguments are ignored - return options - -def main(): - """Install or upgrade setuptools and EasyInstall""" - options = _parse_args() - archive = download_setuptools( - version=options.version, - download_base=options.download_base, - downloader_factory=options.downloader_factory, - ) - return _install(archive, _build_install_args(options)) - -if __name__ == '__main__': - sys.exit(main()) diff --git a/Adafruit_Python_MCP3008/setup.py b/Adafruit_Python_MCP3008/setup.py deleted file mode 100644 index 31bda9c..0000000 --- a/Adafruit_Python_MCP3008/setup.py +++ /dev/null @@ -1,30 +0,0 @@ -try: - # Try using ez_setup to install setuptools if not already installed. - from ez_setup import use_setuptools - use_setuptools() -except ImportError: - # Ignore import error and assume Python 3 which already has setuptools. - pass - -from setuptools import setup, find_packages - -classifiers = ['Development Status :: 4 - Beta', - 'Operating System :: POSIX :: Linux', - 'License :: OSI Approved :: MIT License', - 'Intended Audience :: Developers', - 'Programming Language :: Python :: 2.7', - 'Programming Language :: Python :: 3', - 'Topic :: Software Development', - 'Topic :: System :: Hardware'] - -setup(name = 'Adafruit_MCP3008', - version = '1.0.2', - author = 'Tony DiCola', - author_email = 'tdicola@adafruit.com', - description = 'Python code to use the MCP3008 analog to digital converter with a Raspberry Pi or BeagleBone black.', - license = 'MIT', - classifiers = classifiers, - url = 'https://github.com/adafruit/Adafruit_Python_MCP3008/', - dependency_links = ['https://github.com/adafruit/Adafruit_Python_GPIO/tarball/master#egg=Adafruit-GPIO-0.6.5'], - install_requires = ['Adafruit-GPIO>=0.6.5'], - packages = find_packages()) |